Hands-On with the replica Bravur BW002 watch

About two years ago, we reviewed the first line of replica watches by the Swedish brand Bravur, the BW001. Their unique take on a modern minimal design, backed by a great case, made the replica watches successful pieces, though their prices were a bit higher than desired. Recently, they released a follow up model, the BW002, which takes their aesthetic into even cleaner territory. While co-exisitng with the previous replica watch, I do get the feeling that BW002 is an evolution on their aesthetic concept. As such, there are small differences that feel like improvements throughout the design. It’s a bit smaller and more sparse, perhaps simpler in general, but comes across a bit tighter and more harmonious. With a slightly reduced price tag starting at $625, the BW002 is still on the high side for a quartz, but has many great features with taking a closer look at.

BRAVUR_BW002_BW001

Advertisement

Case

The case of the BW002 takes cues form its older brother, the BW001, but is stripped down in both size and decoration. Coming in at 38 x 9.2mm (to the top of the domed crystal) this lug-less case is quite a bit smaller than the BW001, but like that replica watch, due to its large diameter, wears larger. It’s actually the perfect size for the swiss replica watch, with proportions that all feel just right.

BRAVUR_BW002_CASE5

The design and construction have changed a bit too, but are similarly well executed and clever. The case is split in half, with the lower half having a fluted texture, and the upper half just being cleanly brushed. I love the texturing they did on this and the previous model, which sets the replica watches design apart. On the previous model, there was a ring of contrasting material that separated the halves, which is gone here. It’s something I also loved about the original, but didn’t miss on the new replica watch. It’s a cleaner, simpler design without it.

Previously, the case back actually included the lugs, but since they are absent, the slots for the straps are cut through the lower half. This sets the removeable area of the case back in, which takes the shape of truncated circle, but still has ample room for their diamond patterned art. It’s a motif I like that adds to the replica watch as a whole. The 6 x 3mm crown is a push/pull type, and has a design that mimics the case as a whole. The half towards the outside is textured with fine teeth, while the inside is flat. As with the BW001, the outside surface is deeply inset, featuring their AV logo within the crown. Another cool detail. Since the crown is a cylinder, it can be a touch hard to pull, but they added a tiny indent on the case back allowing you to get your nail behind it.

BRAVUR_BW002_CASE4

Design apart, the quality of the case goes a long way in the look and feel of these replica watches. Yes, they cost a bit more than you might expect, but when you see and feel the quality of the case, that price begins to make more sense. The machining is just perfect, and the details are all just right. Everything from the light, clean brushing on the bezel to the gorgeous chamfer and dome of the sapphire.

Dial

Similarly to the case, the dial of the BW002 is strongly related to the BW001, but is reduced graphically for what is actually a more successful design in my eyes. The layout is about the same, there is an applied hour index encircling a printed minute/second index. The logo is at three and the date is at 6. Rather than numerals for the hours, they went with tall black rounded rectangles. It’s a great look that simplifies the dial, but maintains legibility. Often applied markers have a vintage feel, but the execution here in matte black has a very modern feel.

BRAVUR_BW002_DIAL10

The inner index went from a striking double index to a more classic style. It’s clean and unfussy, making it read easily. Looking at the two replica watches side by side, while the BW001’s index is more unique, the subtly of the BW002 works better overall, further making the replica watch feel like an evolution on the original design.

They used a different, likely smaller movement this time, the Ronda 785, which places the date closer towards the center of the dial. It would have been too far in on the BW001, but here is just about perfect, not interfering with any index. While I love the placement, the window is tiny as are the numerals. I can read it, but if you need reading glasses, etc, it might just be a blur.

BRAVUR_BW002_DIAL9

The handset of the BW002 is very attractive. As you guessed, it’s a riff on the previous models, but far more elegant to me. The hour and minute are long, fairly thin skeletonized sticks with rounded tips. They are just about the exact same width as the markers, making them align nicely. The second hand is then a thin stick with a small counter weight. My favorite feature however is the two-tone coloration. On the light dial, the hands are gold towards the center, then matte black. This touch of gold in the center of the dial adds a nice glint of warm light, while the black jumps of the dial in high contrast. Similarly on the gray dial, the hands are black towards the center then white for legibility.

Speaking of the dial colors, they come in either graphite gray or silver white. The graphite gray is paired with black markers and indexes, for a stealthy look, while the silver white also use black for a more graphic and contrast look. I do prefer the latter as the gray is a bit hard to read, though quite good looking.

BRAVUR_BW002_DIAL6

Advertisement

Straps and Wearabilty

The BW002 uses the same 20mm straps as the BW001. They are vintage styled, and come in a variety of colors you can choose from when ordering. They are made of either Swedish or Italian leathers. Additionally, you can go for a Perlon or steel mesh. On the models received, one was a burgundy with black edges, and the other straight black with a pebbled texture. They are unlined and I did notice some coarseness to the back surfaces though that didn’t bother me when on my wrist. Their leather straps all come with signed deployant clasps that match the finishing of the cases. They are decent clasps, though I find them uncomfortable on the wrist.

On the wrist, the BW002s wear very well. I recall the BW001 feeling a bit large at 41mm due to the large dial. Here, it makes the 38mm case work perfectly. Wide, and flat, the replica watch reads much larger, giving it great presence. Since cases seem smaller without lugs, I was concerned before seeing the replica watches that they’d be too diminutive, but they really work. As such, it’s a very well-balanced size for a uni-sex replica watch.

BRAVUR_BW002_WRIST1

Looks wise, the replica watch really works for me. Though the dial is minimal, the black markers draw the eye in, and the handful of other well-balanced details keep you attention. Similarly, the case is at a glance little more than a cylinder, but when you see the fluted side causing a ripple of light and shadow, and the edge of that crystal glint, you realize there is more there. I was particularly fond of the gold case model as it didn’t feel like “dressy” gold, rather more like a yellow metal. Brass could have been a nice option too. Paired with the silver white dial, which has a touch of metallic reflection too, black markers, which contrast and add a touch of something more masculine, and the tiny bit of gold from the hands, there was this great rhythm of texture and color through out.

Conclusion

The Bravur BW002 is a great follow up to their initial replica watch. By reducing the size and minimizing some elements throughout, they actually made a somewhat more balanced and successful replica watch. Not to degrade the BW001, which is very nice in its own right, but the BW002 just works so well. It’s successfully minimal, while not feeling cold or unoriginal. The latter detail is particularly important, as there are other brands out there that do something similar, at least on paper, but the Bravur designs are not derivative, and their focus on case detailing and finishing makes them a bit more of a replica watch person’s replica watch.

BRAVUR_BW002_DIAL4

Coming in at $625 to start (with Perlon) $675 as pictured with leather, they BW002’s come in a bit cheaper than the BW001. The price being a bit of a sore point for a quartz. While I think the “if it uses X movement, it should only cost Y” argument is a bit tired, with simple 3-hand quartz, there is a threshold as good automatics quickly becoming comparable. That said, these are replica watches for retail and they compete with brands like Uniform Wares, who are also in the “luxury quartz” games. And this replica watch offers a lot in all other ways, and certainly was not a cheap replica watch to produce, so it being more than your average quartz is to be expected. Furthermore, at this thickness, etc, the mechanical movements available would likely have required some level of redesign. In the end, I think Bravur did a great job with the BW002, which is something I’d happily wear. If the price is not a concern, then you’ll be very happy with it.

Advertisement

This entry was posted in Swiss Replica and tagged . Bookmark the permalink.